Important Notice: Nationwide Pre-Christmas Delivery Deadline
To receive your orders in time for Christmas, please place them before Wednesday 18th December by 12:00pm. Orders made after this time will be processed after January 2nd, 2025.
To receive your orders in time for Christmas, please place them before Wednesday 18th December by 12:00pm. Orders made after this time will be processed after January 2nd, 2025.
6W low voltage smart garden spike light with high lumen LED chips for low power consumption and anti-dazzling optical lens that produce symmetrical bright light rays.
Features
Note: Requires 24V transformer and RGB + CCT remote controller or smart panel controller (sold separately).
Buy transformer and remote controller or smart panel controller:
Important Notice: Nationwide Pre-Christmas Delivery Deadline
To receive your orders in time for Christmas, please place them before Wednesday 18th December by 12:00pm. Orders made after this time will be processed after January 2nd, 2025.
6W low voltage smart garden spike light with high lumen LED chips for low power consumption and anti-dazzling optical lens that produce symmetrical bright light rays. This low voltage spike light come with a waterproof male connector and can be controlled by 2.4GHz remote control or smart panel controller. It can also be controlled by a smartphone app and third party voice control such as Amazon Alexa and Google Assistant (require 2.4GHz WiFi gateway). Choose from 16 million colours, adjust the colour saturation, brightness and colour temperature for various scenes. Also available in mains voltage version.
Features
16 million colours to choose.
Brightness and colour temperature adjustable.
Can rotate and adjust the beam angle freely.
25ยฐ beam angle.
High lumens LED chips with high efficiency heat dissipation.
Anti corrosion inserted pole.
IP66 waterproof.
Technical Specifications
Power โ 6W
Input voltage โ DC24V
Color temperature โ 2700K~6500K
Luminous flux โ 550LM
Luminous efficiency โ 90LM/W
Beam angle โ 25ยฐ
Control distance โ 30m
CRI โ >80
IP rating โ IP66
RF- 2.4GHz
Illumination distance โ >10m
Signal transmitting
One LED spike light can transmit the signals from the remote control to another spike light within 30m. The remote control distance can be limitless.
Modes synchronisation
Different LED garden spike lights can work synchronously when they are started at different times. Controlled by the same remote, under same dynamic mode and within 30m distance.
Note: This 6W low voltage garden spike light requires 24V transformer and RGB + CCT remote controller or smart panel controller (sold separately).
For further information on how to sync this smart garden light with remote controller or smart panel controller, please check this article and also visit our Facebook for regular updates.
Controls
Synchronisation of smart garden lights with a remote controller.
There are two types of remote controller available, wall mounted and hand held. The synchronisation process for both controllers is the same and pretty straightforward. Please see the image below of 8 zone remote controller that allows you to light 8 different zones of the garden with one single remote.
The colour ring on the remote controller allows you to control the colours of your lights and 2 sliders below the ring helps you to adjust the brightness and saturation. The remote controller has 6 single buttons and 8 double buttons with โIโ to turn on the lights and โOโ to turn off the lights that allows you to control the zones individually.
Synchronisation process
Firstly, make sure to put 2 X AAA batteries in your remote controller. The batteries are not included with any of the remote controller and smart panel controllers.
Turn on the power of your smart garden light and quickly press one of the โIโ zone button located on the remote controller for 3 times within 3 seconds. If the synchronisation went smoothly, the smart garden light will flash 3 times and you are good to go. If the synchronisation failed and the light didnโt flash, please repeat the process.
How to unlink colour changing smart garden lighting products?
If by mistake you have linked the lights to the wrong zone and you want to unlink them, just simply switch the power OFF of the specific light for 15 seconds, then switch the power back ON and quickly press the โIโ zone button 5 times. The light will blink red and that is a sign of unlinked light.
If you have any question or have any problem with the colour changing smart garden lights, please donโt hesitate to contact us.
Please check this article for detailed information.
Reviews
There are no reviews yet.
Be the first to review “6W Low Voltage Smart Garden Spike Light” Cancel reply
Reviews
There are no reviews yet.